Proxxon 34108 Micro Mill FF 230

Proxxon 34108 Micro Mill FF 230 Review

Proxxon 34108 Micro Mill FF 230 Feature

• Hand wheel serves as both height adjustment and fine mill feed
• Poly-V drive system provides speeds of 280, 550, 870, 1,250, 1,700 and 2,500-Rpm
• Precision engineering produces dimensions of 20-Inch overall height, table size of 10-5/8-Inch by 3-5/32-Inch and 41-Pound

A small, high accuracy machining system to mill, drill and bore. The micro milling machine FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as fine feed when milling. One revolution equals 1/32" (1 mm) travel, 1 division equals .002" (0,05 mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds. The machine comes with three collets of 15/64" - 5/16" and 25/64" (6, 8 and 10 mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80 mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5 mm). 1. Hand wheel serves as both height adjustment and fine mill feed. 2. Poly-V drive system offers 6 speeds between 280 and 2,500 rpm. 3. The clamps and work piece shown are not included. 4. Hand wheels with zero adjustable scale, 1 rev = 1/32" (1 mm), 1 division = .002" (0,05 mm). Important: For best results when milling, it is recommended to lock the headstock. This is easily done by the FF 230's lock levers. Micro milling machine FF 230: A small, high accuracy machining system to mill, drill and bore.The micro milling machine FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as fine feed when milling. One revolution equals 1/32" (1 mm) travel, 1 division equals .002" (0,05 mm). The quill and headstock may be locked i

Jet 690150 JTM-1050 230/460-Volt 3 Phase Variable Speed Vertical Milling Machine with X-Axis and Y-Axis Powerfeeds

Jet 690150 JTM-1050 230/460-Volt 3 Phase Variable Speed Vertical Milling Machine with X-Axis and Y-Axis Powerfeeds Review

Jet 690150 JTM-1050 230/460-Volt 3 Phase Variable Speed Vertical Milling Machine with X-Axis and Y-Axis Powerfeeds Feature

• X and Y-axis powerfeeds installed
• 3HP, 3Ph, 230/460V motor (Prewired 230V)
• 21.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• Variable spindle speeds with a range of 70-3800 RPM

Includes JTM-1050 Mill with X & Y Powerfeed Installed - 690150, Internal Coolant Tank Built (Coolant Pump Not Included), Tolerance Test Sheet, One Shot Lubrication System, Way Covers, Draw Bar, Tool Box

BOLTON TOOLS Precision Milling Machine Vises

BOLTON TOOLS Precision Milling Machine Vises Review

BOLTON TOOLS Precision Milling Machine Vises Feature

• Jaw width............. 5'
• Jaw opening ........5-1/2"
• Jaw Height ............1- 10/16"
• Throat depth .........1-1/2"
• Weight ...................48 LBS

1. Comes with swivel base, easy to read 0 - 360 degree scales 2. The accuracy of vise(parallelism and squareness) is 0.025mm/100mm 3. The special segment in the movable jaw forces the vertical pressure downward as the horizontal pressure works, so that the jaws will not lift the workpiece. 4. Four positions allow extra capacity to change the opening of the jaws.

K2 CNC Router, CNC Milling Machine 2514 & Controller

K2 CNC Router, CNC Milling Machine 2514 & Controller Review

K2 CNC Router, CNC Milling Machine 2514 & Controller Feature

• Standard 5 inches of clearance and 5.5 inches of travel.
• Easy to assemble. 99% preassembled.
• Wider X axis clearance of 19 inches.
• In-line bearing arrangement on all axis for better longevity.
• 20mm shafts and bearing on all axis. All Axis uses Kert Lead screws and Kert Anti-backlash Nuts.

New KT-2514 2011 version Lead time to ship is 14-30 Days. Travel of (Y)24" x (X)14" x (Z)5.5" (Shaft linear motion, compatible with nema 23 steppers and k2 servo motors) The new KT-2514-09 has 20mm shafts, antibacklash nuts, wider 19 inch material capacity. Use the accurate machine to cut thin aluminum, plastics, and wood. The anti-backlash nut and the .100" pitch leadscrews provide very accurate resolutions and is great for fine inlay work. The pitch provides great mechanical advantage when cutting hard woods and have been tested to cut .375" deep, at 70IPM, with a .375" diameter bit when used with Gecko drives and 280 Oz/in motors. With the right approach in your toolpaths, spindle, bits, accessories you can achieve results in milling that once required a ,000 and more cnc machines. With the KT-2514-09 you now can do this in your own garage, business, or anywhere with 110V outlet. INCLUDED in auction: + New KT-2514-09 Frame (Shaft linear motion), + leadscrews .100" pitch and Kerk anti-backlash nut. + 3 Axis control box using gecko drive, CD for MAch settings. + 3 Stepper Nema 23 motor (275 oz/in). + Table Top with T-slots (2 inches apart, uses 1/4-20 nuts and screws) - Retails 5 + Mount choices: Porter Cable 892, Bosch Colt trimmer, Porter Cable 7310 only (we recommend the PC892). + K2 will ship with Porter Cable 892 mount if you do not notify a different model mount. + Cable Carriers. + Nema 23 mounts. + Home limit switches. Use these to home the machine. + Plugs for Home switches. + Settings for Mach 2 or Mach 3 with K2 machine profile CD/email and settings for gecko drives (Does NOT include full version of Mach 3 software with license) + Notice --- You may add more K2 options to this sale after this auction is won by you. + K2 will not remove items from the machine to machine it a lower in price.

JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine

JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine Review

JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine Feature

• Hinged belt cover allows faster speed changing
• 9-1/2-by-31-3/4-inch worktable
• 2 hp, 1 phase, 230-volt only motor
• Heavy-duty tapered roller bearins support the spindle
• Stand not included

With its generously sized worktable and hinged belt cover for faster speed changing, the Jet JMD-18 Mill Drill Machine is efficient and precise, whether you're working with aluminum, wood, or even ceramic tile. Powered by a UL-listed motor, this high-performance tool has a drilling capacity of 1-1/4 inch and a 15-7/8-inch swing. It also boasts a three-inch face mill capacity, a 3/4-inch end mill capacity, and a host of innovative features, like an easy-to-read internal depth gauge and a worklamp.

The JET JMD-18 Mill Drill Machine offers: A UL-listed, 2 HP, 230-volt motor for dependability An extra large, 9.5 x 31.75-inch worktable An easy-to-read internal depth gauge and worklamp

Easy-access controls and a convenient work lamp help you maintain precision results. View larger.

The extra large worktable is ideal for big projects.

Extra-Large Work Table for Bigger Jobs
Thanks to its extra large, 9.5 x 31.75-inch worktable, the JMD-18 gives you the freedom to tackle larger scale projects that require more space and flexibility. And the included worklamp provides ample illumination of any size work piece, even in dim conditions.

2 HP Motor and Hinged Belt Cover for Power and Fast Results
The JMD-18 operates with a powerful UL-listed, 2 HP, one phase, 230-volt motor that gives the tool a range of 12 spindle speeds from 15 to 3,000 RPM. And to minimize delays and wait periods as you transition to different speeds, this motor is also supported by a hinged belt cover that offers faster speed changing.

Cast Iron Column and Heavy-Duty Roller Bearings for Support and Stability
The JMD-18 has a strong, supportive design. First, a one-piece cast iron column offers additional support where you need it, giving you the freedom to handle heavier material without worry. And heavy-duty, tapered roller bearings support the spindle for greater tolerance and more accurate drilling depth.

Easy-Read Depth Gauge and 360-Degree Swiveling Head for Precision
Easy to operate, the JMD-18 offers user-friendly features, like satin finished easy-read dials, to guide you through every step of your project. A positive quick-stop knob combines with an easy-to-read internal depth gauge for consistency, while a 360-degree swiveling head gives you the flexibility you need for precise results.

The JMD-18 is backed by a two year warranty.

About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box
JMD-18 Mill Drill Machine, one worklamp, adjustable carbide facemill, drill press angle vise, 1/2-inch drill chuck, chuck arbor, and draw bar.
Milling/drilling machine has a 1-pc. cast iron column for added support, extra-large work table, positive quick-stop knob and easy-to-read internal depth gauge. Belt cover has quick-slide latch for faster belt adjustment to change spindle speeds. Heavy-duty tapered roller bearings support spindle for greater tolerance and more accurate drilling depth. HP: 2, Volts: 230, Speed (RPM): 150 - 3,000, Speeds (qty.): 12, 360deg Head Swivel: Yes, Draw Bar: Yes, Drilling Capacity (in.): 1 1/4, Chuck Size (in.): 1/2, Max. Spindle Distance (in.): 18, Light Included: Yes, Dimensions L x W x H (in.): 42 1/2 x 39 3/4 x 43 1/2

JET JHPB-30 3-Inch Manual Hydraulic Pipe Bender

JET JHPB-30 3-Inch Manual Hydraulic Pipe Bender Review

JET JHPB-30 3-Inch Manual Hydraulic Pipe Bender Feature

• Simple manual operation for ease of use
• Eight bending dies included standard (1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3")
• Rotating stand locks in three positions for stability and versatility
• Heavy-duty hydraulic cylinder capable of bending schedule 40 pipe
• Completely manual so external power is not needed

Ideal for the hobbyist, DIYer or professional, this JET metal dual-function hobby drilling/milling is a quality addition to your workshop to shape and drill metal and other solid material. This machine features cast iron design vibration-free operation. Volts: 110, Speed (RPM): 100 - 1000 / 200 - 2000, Speeds (qty.): 2, 360deg Head Swivel: No, Draw Bar: No, Swing: 5 1/2, Drilling Capacity (in.): 3/8, Chuck Size (in.): 1/2, Max. Spindle Distance (in.): 8 1/4, Worktable L x W (in.): 5 3/4 x 9 1/2, Light Included: No, Stand Included: No, Dimensions L x W x H (in.): 18 x 22 x 26

Jet 690089 JTM-2 115/230-Volt 1 Phase Vertical Milling Machine

Jet 690089 JTM-2 115/230-Volt 1 Phase Vertical Milling Machine Review

Jet 690089 JTM-2 115/230-Volt 1 Phase Vertical Milling Machine Feature

• 2HP, 1Ph, 115/230V motor (Prewired 230V)
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 8 spindle speeds ranging from 80-2720 RPM
• Built with coolant system(coolant pump not included)

Includes 9-in x 42-in 2 HP 1-Phase R-8 Taper Vertical Milling Machine - 690089, One-Shot Lubrication System, Way Covers, Draw Bar, Tool Box &, Tools

Grizzly G0499 10" X 54" 3-Axis CNC Milling Machine

Grizzly G0499 10" X 54" 3-Axis CNC Milling Machine Review

Grizzly G0499 10" X 54" 3-Axis CNC Milling Machine Feature

• Cross travel: 16"
• Longitudinal travel: 31.75"
• Quill diameter: 105mm
• Quill travel: 6"
• Table size: 10" x 54"

We want your CNC purchase from Grizzly to be as pleasant and painless as possible. For this reason, an 0.00 "set-up" charge is applied after purchase and after a Centroid™ technician has visited your location in the lower 48 states to give you or your employees a one day training on the use of the controller. Further, Centroid™'s technicians will be able to provide support via phone if needed. Visit their website at www.centroidcnc.com. A Ball-Bar testing report is enclosed with each machine. The bearings used are high precision C7(P4, GMN) class for spindles. They also feature high precision ball screws (C5 class) with double nuts for X and Y axis, Meehanite castings with Turcite for X and Y axis is used in the machines. The beds and knees feature square ways for extreme stability and dovetail ways for the column - all hardened and ground. Spindle speeds are 50-5000 RPM. Auto lubrication, work lamp, coolant system and chip tray are all standard equipment. Each machine is fitted with the Centroid™ M400 solid state controller with a 15" LCD display. The software included is conversational, with cutter radius compensation, drilling cycles, multi-range spindle and G-code backplot graphics. This is a NICE software package with features that includes LAN connectivity, USB file transfer and high speed "True 3D" machinery.

JET JTM-4VS Vertical Mill with Anilam 411 DRO and X AXIS TPFA

JET JTM-4VS Vertical Mill with Anilam 411 DRO and X AXIS TPFA Review

JET JTM-4VS Vertical Mill with Anilam 411 DRO and X AXIS TPFA Feature

• Meehanite casting
• Precision bored and honed milling head
• Large diameter quill is chromed
• High precision Class 7 spindle beardings

The JTM-4VS with X Powerfeed is the perfect solution for maintenance shops, repair shops, schools and light production. The 3 HP motor requires 230/460V, 3-phase (prewired 230V). Durable Meehanite casting and a precision bored and honed milling head. Chromed, large-diameter quill and high-precision Class 7 spindle bearings and R-8 spindle taper. HP: 3, Volts: 230/460V (prewired 230V), Speed (RPM): 60 - 4,200, Speeds (qty.): Variable, Vertical Stroke: 5, 360deg Head Swivel: Yes, Draw Bar: Yes, Swing: 19, Chuck Size (in.): 5/8, Max. Spindle Distance (in.): 17 1/2, Worktable L x W (in.): 9 x 49, Light Included: No, Stand Included: Yes, Dimensions L x W x H (in.): 63 x 66 x 85

Wallmonkeys Peel and Stick Wall Decals - Fraise - 60"W x 45"H Removable Graphic

Wallmonkeys Peel and Stick Wall Decals - Fraise - 60"W x 45"H Removable Graphic Review

Wallmonkeys Peel and Stick Wall Decals - Fraise - 60"W x 45"H Removable Graphic Feature

• ALL orders CUSTOM printed. When you place an order, the image is made in the USA, just for you!
• Printed on WHITE, premium, self-adhesive, re-positionable fabric paper.
• No nails, frames or glue. No professional installation required.
• Simply peel and stick! Easy to remove and re-apply.
• BE SURE you ordered the right size for your intended use!

WallMonkeys wall graphics are printed on the highest quality re-positionable, self-adhesive fabric paper. Each order is printed in-house and on-demand. WallMonkeys uses premium materials & state-of-the-art production technologies. Our white fabric material is superior to vinyl decals. You can literally see and feel the difference. Our wall graphics apply in minutes and won't damage your paint or leave any mess. PLEASE double check the size of the image you are ordering prior to clicking the 'ADD TO CART' button. Our graphics are offered in a variety of sizes and prices.

WallMonkeys are intended for indoor use only.

Printed on-demand in the United States Your order will ship within 3 business days, often sooner. Some orders require the full 3 days to allow dark colors and inks to fully dry prior to shipping. Quality is worth waiting an extra day for!

Removable and will not leave a mark on your walls.

'Fotolia' trademark will be removed when printed.

Our catalog of over 10 million images is perfect for virtually any use: school projects, trade shows, teachers classrooms, colleges, nurseries, college dorms, event planners, and corporations of all size.

BOLTON TOOLS Drill press Machine Vises

BOLTON TOOLS Drill press Machine Vises Review

BOLTON TOOLS Drill press Machine Vises Feature

• Jaw width .......... 3- 7/16"
• Jaw height ..........1-1/4"
• Weight ................6 LBS.
• Jaw opening .......2- 1/4"
• Total height ........2-6/16"

1. Jaw width .......... 3- 7/16" 2. Jaw opening .......2- 1/4" 3. Jaw height ..........1-1/4" 4. Total height ........2-6/16" 5. Weight ................6 LBS. 6. Fit for all bolton lathes.

Bi-Metal Hole Saw Shank With Pilot Bit 9/16"-1-3/16"- Used for Mild Steel, Tool And Stainless Steel, Cast Iron,Brass, Aluminum, Wood, Plastic, PVC, with Portable Electric Drill, Drill Press, Lathes,Boring Mills, Milling Machines, Etc.

Bi-Metal Hole Saw Shank With Pilot Bit 9/16"-1-3/16"- Used for Mild Steel, Tool And Stainless Steel, Cast Iron,Brass, Aluminum, Wood, Plastic, PVC, with Portable Electric Drill, Drill Press, Lathes,Boring Mills, Milling Machines, Etc. Review

Bi-Metal Hole Saw Shank With Pilot Bit 9/16"-1-3/16"- Used for Mild Steel, Tool And Stainless Steel, Cast Iron,Brass, Aluminum, Wood, Plastic, PVC, with Portable Electric Drill, Drill Press, Lathes,Boring Mills, Milling Machines, Etc. Feature

• 
  Arbor:
  Diameter:
  Disc Type:
  Grit:
  Length:
  Machine: Portable Electric Drill, Drill Press, Lathes,Boring Mills, Milling Machines, Etc.
  Material: HSS-M42 Bi-Metal Steel
  Max RPM:
  Shank:
  Tooth Count:
  Use: Mild Steel, Tool And Stainless Steel, Cast Iron,Brass, Aluminum, Wood, Plastic, PVC
• WARNING!
  To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they're received before 12:00 noon CST.
• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Heleta's High Speed Steel (HSS) Bi-Metal Hole Saws are made with M42 grade steel. They are designed to cut accurate holes in mechanical materials up to 1-3/4 thick. They can be used in portable electric tools, air tools, drills presses, lathes, boring mills, milling machines, and other machines having rotating spindles.

Set of 5 Thin Angles - 6 - 10 Degree

Set of 5 Thin Angles - 6 - 10 Degree Review

Economy thin angle and parallel sets are precision ground on the working surface only. Full hardened steel. 5/32" thick. Model ANG-6 - Set of 6 angles, 1/2 Degree through 5 Degree; 3 1/2" long. Model ANG-5 - Set of 5 angles, 6 Degree through 10 Degree; 3 1/2" long. PP-04 - Set of 4 pairs of parallels, 3" long. 1 pair each of 1/2", 5/8", 3/4", 7/8".

Flex LWW2106VR 1-3/4 Edge Milling Machine, 1800-5500 RPM, 15 Amps

Flex LWW2106VR 1-3/4 Edge Milling Machine, 1800-5500 RPM, 15 Amps Review

The Flex LWW2106VR is a 1-3/4” Edge Milling Machine. The heavy-duty two-handed edge milling machine is designed to handle up to 1-3/4” thick granite slabs. It is ideally suited to round edges of larger natural stone surfaces like countertops, tables or double basin kitchen sink holes. LWW 2106 VR is a portable tool yet has the power and flexibility of conventional stationary CNC machines. The machine is easily controlled because of well-balanced ergonomics and the easy glide of the plastic balls in the aluminum guide carriage. This unit should be operated only in conjunction with the GFCI operator protection circuit breaker.

7/8" High Speed Steel St. Fl Hand Reamer

7/8" High Speed Steel St. Fl Hand Reamer Review

7/8" High Speed Steel St. Fl Hand Reamer Feature

• Size: 7/8"
• Overall Length: 9 3/4"

High speed steel. Straight flute hand reamer.