Jet 690019 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine with X-Axis Powerfeed

Jet 690019 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine with X-Axis Powerfeed Review

Jet 690019 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine with X-Axis Powerfeed Feature

• X-axis powerfeed installed
• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 16 spindle speeds ranging from 80-5440 RPM

The JTM-1 with X Powerfeed is the perfect solution for maintenance shops, repair shops, schools and light production. The 2 HP motor requires 230V, 3-phase. Durable Meehanite casting and a precision bored and honed milling head. Chromed, large-diameter quill and high-precision Class 7 spindle bearings. HP: 2, Volts: 230, Speed (RPM): 80 - 5,440, Speeds (qty.): 16, Vertical Stroke: 5, 360deg Head Swivel: Yes, Draw Bar: Yes, Swing: 19, Chuck Size (in.): 5/8, Max. Spindle Distance (in.): 17 1/2, Worktable L x W (in.): 9 x 42, Light Included: No, Stand Included: Yes, Dimensions L x W x H (in.): 64 x 87 x 52

Flex LWW2106VR Heavy Duty Edge Milling Machine

Flex LWW2106VR Heavy Duty Edge Milling Machine Review

Flex LWW2106VR Heavy Duty Edge Milling Machine Feature

• 1800-5850 no-load speed
• Slab thickness range of 3/4" - 1-3/4"
• GFCI circuit breaker in power cord for operator protection
• Quality shut-off carbon brushes
• Quick-action brass coupling for 1/2" lego connector for water hose

Milling and grinding produce clean profiles and contours along the edges of natural stone slabs. Sinks, kitchen countertops, counters, and tables.Up to 1-3/4" thickness. Saves time and money.Easy-glide base ensure precise work without operator fatigue.

VS-K4 4" K Type Milling Machine Vise

VS-K4 4" K Type Milling Machine Vise Review

VS-K4 4" K Type Milling Machine Vise Feature

• Jaw Width: 4"
• Jaw Height: 1 3/8"
• Total Height: 4 1/4"
• Opening w/ Jaws: 2 1/4"
• Opening w/o Jaws: 3"

With swivel base, graduated in 180 Degree. Replacement jaws. Large Acme screw. Good Quality Medium Duty Vise

Jet 690082 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine

Jet 690082 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine Review

Jet 690082 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine Feature

• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 16 spindle speeds ranging from 80-5440 RPM
• Built with coolant system(coolant pump not included)

Includes 9-in x 42-in 2 HP 3-Phase Vertical Milling Machine - 690082, One-Shot Lubrication System, Way Covers, Draw Bar, Tool Box &, Tools

Palmgren MVS40 4-Inch Milling Machine Vise with Swivel Base, Dark Grey

Palmgren MVS40 4-Inch Milling Machine Vise with Swivel Base, Dark Grey Review

Palmgren MVS40 4-Inch Milling Machine Vise with Swivel Base, Dark Grey Feature

• Jaw width: 4-Inch
• Jaw opening: 4-Inch
• Throat depth: 1-1/2-Inch
• Jaw deflection: 0.002-Inch at 4,000 -Pound

This tough vise is used for milling and other demanding machine applications. Hardened moveable jaw plates are square to 0.0015-Inch. Replaceable smooth jaw plates made of hardened and ground tool steel (replaceable); large cast iron crank handle. The base and bed are parallel to 0.002-Inch. The removable base swivels 360-Degree (1-Degree graduations) and can be fastened in place with two bolts.

Kaba Ilco #P-X23MC Key Machine Replacement Cutter

Kaba Ilco #P-X23MC Key Machine Replacement Cutter Review

Kaba Ilco #P-X23MC Key Machine Replacement Cutter Feature

• Kaba Ilco #P-X23MC Key Machine Replacement Cutter
• KABA ILCO CORP

Replacement Key For 025 Key Machine Replacement Cutter.

Milling Machine Visorguard Kit

Milling Machine Visorguard Kit Review

Milling Machine Visorguard Kit . Provides Complete Protection Between Cutting Tools And The Operator's Eyes. Easy Grab Handle Flexbar Arm Permits Setting Of Visorguard At The Correct Height And Angle For Each Setup. Mounts On Most Machines, Even With Digital Readouts, In Minutes. All Mounting Brackets Included. Shield Size 16" Wide X 8" High.

Grizzly G1075 52 pc. Clamping Kit - 3/8" Bolt Size

Grizzly G1075 52 pc. Clamping Kit - 3/8" Bolt Size Review

Our Clamping Kits are among the best in the world! All the blocks, bolts, nuts and hold-downs are case hardened. Each clamping kit includes: 24 studs, 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts and 6 end hold-downs. We offer the two most popular sizes" 3/8" and 1/2". The 3/8" set fits our Model G1004, G1005, G1008, G6760, G3102, g3103 and G8031 mills, while the 1/2" set fits our Model G1006, G1007, G1126, G4207, G4028, G4029, G5757, G0519, G0521, G3358, G3616 and G3167 mills, plus other larger milling machines on the market. Racks can be bolted to the wall or side of machine for easy access.

JET JTM-1054R 5-Horsepower 230-460-Volt Three Phase R8 Taper Vertical Mill with 10-Inch by 54-Inch Table

JET JTM-1054R 5-Horsepower 230-460-Volt Three Phase R8 Taper Vertical Mill with 10-Inch by 54-Inch Table Review

JET JTM-1054R 5-Horsepower 230-460-Volt Three Phase R8 Taper Vertical Mill with 10-Inch by 54-Inch Table Feature

• Meehanite casting
• Hardened and ground table certified to be 52C Rockwell hardness
• Chrome leadscrews on X and Y axis
• Box style ways on Y and Z axis
• Hardened and ground table

Includes 10-in x 54-in Vertical Milling Machine - 690053

Taig 1220 - Milling Attachment

Taig 1220 - Milling Attachment Review

Taig 1220 - Milling Attachment Feature

• MADE IN THE USA

This is a vertical slide similar to the crosslide for adding a third axis to the Taig (z axis) Work can be mounted on the slide either with the simple vise blocks screws or hold downs and milling and drilling operations performed on it using the headstock to drive the tool. The milling attachment can be adapted to most smaller lathes and used for custom work.

Central Machinery Vertical Milling Machine

Central Machinery Vertical Milling Machine Review

Central Machinery Vertical Milling Machine Feature

• Head tilts 45° left or right
• 9 spindle speeds: 240, 355, 545, 735, 1342, 1425, 1650, 2350 and 2885 RPM
• Swing: 13"
• Longitudinal travel: 15-1/2" maximum
• Cross travel: 6";

For all kinds of milling jobs, this Vertical Milling Machine has the power and features to help you work smarter and - Visit Harbor Freight Tools For More Information.

MMKT-75-O 3/4" x 3-7/8" Milling Machine Knurling Tool

MMKT-75-O 3/4" x 3-7/8" Milling Machine Knurling Tool Review

Dorian Tool MMKT-75-O 3/4" x 3-7/8" Milling Machine Knurling Tool 22530 Knurling Tool

1" R-8 Stub Milling Machine Arbor

1" R-8 Stub Milling Machine Arbor Review

1" R-8 Stub Milling Machine Arbor Feature

• Holds Milling Cutters with1" Diameter Hole
• Length Shoulder to Nut: 2"

Furnished complete with spacers. Holds milling cutters with a central hole (Not end mills).

Zen Toolworks CNC Carving Machine DIY Kit 12x12

Zen Toolworks CNC Carving Machine DIY Kit 12x12 Review

Zen Toolworks CNC Carving Machine DIY Kit 12x12 Feature

• 12 x 12 x 2 inches travel capacity
• PVC Frame, Steel guide rods and precision linear bearings provide maxium accuracy and rigidity
• M8 x 1.25mm Stainless Steel Leadscrew with ball bearing end support
• Effective backlash elemination with brass Anti-Backlash Leadscrew nuts
• New Nema 23 Stepper Motors includes, 3.64V, 1.3A 6 wires

NOT INCLUDED: This is just the CNC machine with motors. You will need a 3 Axis Stepper Motor Driver to manage each motor, a spindle/cutter(a Dremel would work) and a DC power supply for the driver. You will also need a computer with a standard printer port and CNC software. You will also need a way to mount and secure the spindle tightly to the Z-axis plage on the machine. We offer a Spindle Kit complete with a mounting frame for this machine. We also offer a 3 Axis Stepper Motor Driver that we use with our CNC system.

You can see some video demos of this machine in action. Just go to youtube and search for "Zen Toolworks CNC"

You are looking at a DIY kit of a CNC carving machine. Now you can build your very own CNC carving machine to do relief carving, letter cutting, inlay and all other interesting features to enhance your woodworking, PCB or other projects.

The body of the machine is constructed with high density PVC boards. Steel guid rod, linear bearing and stainless steel lead screws are used to construct the moving parts. The anti-backlash brass nut design will virtually eliminate all backlashes. New Nema 23 motors(2 phases, 1.3A, 3.6V, 6 leads) for all three axis are also included. The install is very easy, if you have a bench vise and a power screw driver, that will really help. Install instruction CD is included in the package. Assembling the CNC is very fun and only takes around 3-4 hours to complete. You will be amazed by what can be achieved by this machine. Finally, you can build and own your very own CNC machine for a price that's within your budget!

When you purchase, you will be invited to join our member-only discussion forum. This is a good place to get support and learn from other CNC users and share your own knowledge.

JET JTM-4VS 2-Horsepower 115/230-Volt Single Phase R-8 Taper Vertical Mill with 9-Inch by 49-Inch Table

JET JTM-4VS 2-Horsepower 115/230-Volt Single Phase R-8 Taper Vertical Mill with 9-Inch by 49-Inch Table Review

JET JTM-4VS 2-Horsepower 115/230-Volt Single Phase R-8 Taper Vertical Mill with 9-Inch by 49-Inch Table Feature

• VARIABLE SPEED VERTICAL MILLING MACHINE - JTM-4VS
• Meehanite casting
• Precision bored and honed milling head
• Large diameter quill is chromed
• Satin chrome finish on dials

Includes 9-in x 49-in 2 HP 1-Phase R-8 Taper Variable Speed Vertical Milling Machine - 690180, One-Shot Lubrication System, Way Covers, Draw Bar, Tool Box with Tools

Jet 350045 Drill Press Enclosed Stand for JMD-18/350018

Jet 350045 Drill Press Enclosed Stand for JMD-18/350018 Review

Jet 350045 Drill Press Enclosed Stand for JMD-18/350018 Feature

• Stand with enclosed shelf
• For JET milling/drilling machine, model JMD-18
• One-year limited warranty/Two-year warranty

For use with JET milling/drilling machines Item#s 144553 and 144554.